Safety Information

Warnings

  • This product shall only be connected to an external power supply rated at 5 V DC. Any power supply used with this product shall comply with relevant regulations and standards applicable in the country of intended use.

  • This product should be used in a shielded enclosure. Removing this product from its enclosure or using this product without a shielded enclosure may expose it to additional risks of damage. Extra care should be taken to prevent damage from electrostatic discharge and impact damage when this product is removed from its enclosure or used without a shielded enclosure.

  • This product should only be connected to another device that is rated to be used at the power level this device is configured to provide. Attaching this product to another device that is not rated to be used at the power level that this device is configured to provide may result in damage.

Instructions For Safe Use

  • Do not expose this product to water or moisture.

  • Do not expose this product to excessive heat while in use.

  • Do not place undue stress on any connector port.

  • Any equipment connected to Cynthion should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met.

  • Do not allow equipment connected to Cynthion to make contact with any internal component of Cynthion other than a connector.

  • A pass-through power supply connected to Cynthion must supply at least 5 V DC and no more than 20 V DC. The pass-through power supply must be rated for the current drawn by the pass-through device connected to Cynthion.

  • A device connected to Cynthion must be rated for 5 V DC or the pass-through power supply voltage and must draw no more than 3 A current from the pass-through power supply or 500 mA current from Cynthion’s power supply.

  • Use USB cables of no more than 2 m length with Cynthion.

  • Do not expose Pmod or mezzanine connectors to voltages greater than 3.3 V.